Vietnam White Marble is near-plain white with almost no veining, so Vietnam white marble flooring reads as one surface across a full room, not a patchwork. The pure white marble look you had in mind, without the Italian price. Slabs and tiles for floors, walls and stairs. Indoor use; seal it, keep acids off.
Vietnam White Marble Price
₹ 1000
per sq. ft. (Ex-works, excl. taxes)*
Approx. weight:
—
Estimated weight (— mm)
Natural stone density varies quarry to quarry and slab to slab. The figure shown is the average of the range below.
- Minimum: — kg/sq. ft
- Maximum: — kg/sq. ft
*This is an indicative ex-works price.
Contact us
for an exact quote.
Minimum Order Quantity (MOQ):
Full truckload/container, depending on location. Mixed stone types/finishes allowed.
Looking to buy in smaller quantity within India? Find a local dealer .
Vietnam White Marble — Key Benefits
Long-Lasting
Maintains performance and appearance for decades with proper care
Easy to Clean
Simple cleaning with mild cleaners keeps surfaces looking fresh.
Classical Appearance
Classic look that remains relevant across design trends.
Non-Toxic Material
Free from synthetic chemicals and harmful emissions.
Sustainable Choice
Long lifespan reduces replacement and material waste.
Re-Polishable
Can be re-polished to regain its original colour, because the colour runs the full thickness.
Performance may vary depending on stone type, finish, sealing, installation, and use.
Foundation Colour
White
Secondary Colour(s)
None or minimal grey specks
Quarried In
Vietnam
Pattern
Solid/Plain
Visual Layout
Uniform clean white surface
Colour Movement
None
Also Known As
Vietnam Crystal White Marble, Pure White Marble (Vietnam), Vietnamese White Marble, Milky White Marble, Super White Vietnam Marble, Snow White Marble, Asian Statuario, Vietnam White Polished Marble, Premium Vietnam White, Thassos Look-alike Marble
Consistency
High
Available Customisations
Talk to us with project details
Watchpoint(s)
Colour and hairline cracks or veins
Application Suitability
Vietnam White Marble is an indoor stone. Use it for flooring, wall cladding, countertops, staircases, home mandir and table tops at home, and for lobbies, showrooms and reception walls in commercial interiors. Covered porches and verandahs are fine. Open terraces and facades are not.
Finish Suggestions by Use
Polished Vietnam White Marble flooring reflects the most light, which is why it suits mandir panels, murals and rooms that feel closed in. Choose honed for bathroom floors, since matte hides etch marks and is less slippery wet. Unpolished is the base for inlay and CNC carving, finished after the work is set.
Design Compatibility
The plain white base makes brass inlay, dark wood, black granite and coloured stone inlay read sharper. Avoid running Vietnam White Marble in the same sightline as Makrana or a warm-toned Indian white — Vietnam White is cooler, and the two will read as mismatched whites.
Common Project Types
Home mandir and mandir flooring, marble inlay and parchin kari panels, CNC-carved murals and jaali, villa flooring, hotel lobbies, bathroom vanities, staircases and table tops.
Weather Suitability
Vietnam White Marble handles warm and cool Indian climates indoors without issue. Outdoors, acid rain and pollution etch the surface and standing water causes staining or yellowing, so keep it under cover.
Installation Notes
Use white adhesive — grey shadows through light marble and shows as patches once the floor dries. Dry lay and arrange slabs for tone before fixing, seal before grouting, and check the substrate is level, since hairline cracks are the known watchpoint on this stone.
Vietnam White Marble Slab and Tiles
White, all the way through.
Vietnam White Marble has no veins and no second colour. The same white across a floor, up a wall, and through the full thickness of the slab. It is over 95% calcite. That is why.
It comes from Luc Yen in northern Vietnam, where limestone recrystallised under heat and pressure. The crystals vary in size. The larger ones are translucent, so a polished surface carries light into the stone instead of stopping it at the face.
Appearance of Vietnam White Marble
- Base colour: White. No secondary tone.
- Pattern: None. No veining.
- Composition: Over 95% calcite.
- Structure: Crystalline. Crystal size varies; the larger crystals are translucent.
- Finish: Polished returns the most light. Honed reads matte.
Key Features of Vietnam White Marble
- 2650–2700 kg/m³. Denser than most marble.
- Mohs 3–4. It re-polishes to the colour it was laid at, because the white runs the full thickness rather than sitting on the surface.
- No pattern to align. Joins don't interrupt a vein, because there is no vein. Order one lot and the tone matches too.
- Specify white adhesive. Adhesive tone carries through light stone. White keeps the colour true from the first slab to the last.
- Densify, then seal. Closes the surface before the floor goes into use. Worth doing on any job built for minimal seams.
- Indoors. Floors, wall cladding, countertops, staircases, home mandir, marble inlay, carved murals.
- A pH-neutral cleaner. That is the whole routine.
Buy Pure White Marble Slabs and Tiles at Best Price in India
Available in Select, Standard and Commercial grades, in slabs and tiles, at 18 mm and 20 mm. Set your grade, size, thickness and finish above and the price per sq ft updates as you go.
See the rest of the marble range, or compare against quartzite if the surface is going somewhere it will take hard use.
Please note: This White Marble from Vietnam is a natural stone — tone and grain vary from batch to batch and slab to slab. Select in person at our Kishangarh factory where you can. If not, we'll send high-resolution images or show you the lot on a video call.
Project Gallery
Available Format and Sizes
Gangsaw Size
Large slabs often used for kitchen counters, floors, and walls, with fewer joints for a smooth, seamless look.
Length: 240–370 cm
Width/Height: 120–210 cm
Width/Height: 120–210 cm
Cutter/Vertical Size
Medium slabs for counters, bathrooms, and walls – easier to handle than large slabs.
Length: 180–360 cm
Width/Height: 60–105 cm
Width/Height: 60–105 cm
Tiles
Pre-cut pieces, ready to install.
30x30, 60x30,
60x60, 80x80, 90x60 cm
60x60, 80x80, 90x60 cm
Thickness Options
Thickness: 16 MM
Thickness: 18 MM
Thickness: 20 MM
Available Surface Finishes of White Marble
Finish: Unpolished
Finish: Polished
SUITABLE USES of PURE White Marble
Countertops
Kitchen platforms, kitchen islands, bathroom vanities, pantry counters
Flooring
Indoor floors, living rooms, bedrooms, lobbies, corridors, etc
Wall Cladding
Interior feature walls, TV panels, bathroom walls, kitchen backsplashes
Staircases
Treads, risers, step edges, full staircases
Decorative Use
Dining tables, coffee tables, study tables, office desks, workstations
Architectural Elements
Window sills, door frames, skirting, CNC-carved features, fireplace surrounds
FAQs About Vietnam White Marble
What is Vietnam White Marble and why is it popular?
Vietnam White Marble is known for its consistent pure white appearance, low porosity, and fine grain. It’s widely used in flooring, wall cladding, and architectural projects across the globe.
How does Vietnam White Marble compare to Indian and Italian white marble?
It offers better price-to-quality ratio than many Indian varieties and is more uniform than some Italian options. It’s often chosen for projects that demand both aesthetics and cost-efficiency.
What sizes and finishes are available in Vietnam White Marble slabs and blocks?
Available in gang saw slabs, cutter slabs, tiles, and export-quality blocks. Common finishes include polished, honed, and sandblasted depending on the application.
What is the price of Vietnam White Marble per square foot or per ton?
Pricing depends on block size, slab thickness, finish, and order quantity. Contact for FOB Vietnam price or landed cost based on your location and order size.
Is Vietnam White Marble suitable for high-traffic flooring and export projects?
Yes, it’s widely used in commercial buildings, villas, hotels, and exported to many countries due to its durability, clean look, and competitive pricing.
Can Vietnam White Marble be used outdoors?
Covered areas only — porches, verandahs, covered courtyards. On open terraces and facades, rain and pollution etch the surface and standing water causes staining and yellowing.
What does Vietnam White Marble cost per square foot?
Vietnam White Marble starts at ₹250 per sq ft and goes up to ₹1000 per sq ft or even higher for select lots, depending on grade, thickness and finish. Pre-cut tiles usually work out cheaper per sq ft than slabs, since they come in standard sizes and you lose less to cutting on site.
Explore Other Materials
4 ways to keep looking
More from Stone Galleria's Marble Collection
Recently Viewed
Tell us about your experience
1 of 6
How would you rate this page overall?
By completing this short survey, you tell us what helped and what we can make clearer.
Did you find what you were looking for?
Was there enough information to make a decision?
What were you mainly looking for?
You can select more than one.
What could we improve?
You can select more than one.
Can you tell us more?
Provide your name and email address (optional) so we can follow up on your feedback or let you know about any changes we've made.
0/300
By submitting, you agree to our
Privacy Policy.
Dhanyawad!
That's "thank you" in Hindi — your feedback genuinely helps us improve this page.